Settings Pages
Font
Specifies the fonts used for printing.
Start of String
Specifies the character string with which the text to be converted begins. Up
to 15 single-byte characters can be specified.
End of String
Specifies the character string with which the text to be converted ends. The
default setting is \f. Up to 15 single-byte characters can be specified.
Printer > Media Input
This page lets you configure paper trays by type and size. You can also
configure cassette groups.
Default
Determines the default tray to feed paper from.
Tray
Displays the trays including those provided by option.
Size
Displays the paper size for each input tray. This setting can be changed
using the dropdown list.
Type
Displays the paper type for each input tray. This setting can be changed
using the dropdown list.
Group Settings
If multiple cassettes are available, you can set up to three groups of
cassettes. Cassettes in a group are treated as a single tray. Paper can be
fed continuously from the grouped cassettes.
Printer > Document Output
This page lets you select an output tray.
Paper Output
Determines the default output tray.
Scanner Page
This section includes settings that apply to the scanning function of the
machine, such as default scan resolution or original placement.
In order to attach scanned data file to an E-mail and send it, the SMTP settings
on the Advanced page must be completed.
Scanner > Defaults
The section below provides a summary of the items displayed on the Scanner >
Default page.
Color Selection (Copy)
This selects color mode for copying. Auto automatically identifies full color or
black and white from the original document to copy. You can manually select
either Full Color or Black & White to forcedly switch color mode.
COMMAND CENTER RX
6-13
To Next Page
Loading...
