Settings Pages
3
After you have finished selection, click Submit.
4
The Action Settings > Forward page appears. Check that the Destination is
added to the Destination List.
Deletion
You can delete a Destination from the Destination List.
Open the Action Settings > Forward page.
1
Put a check mark in the check box for the destination you want to delete from
the Destination List.
2
After you have finished selection, click Delete. The Action Settings > Forward
- Delete page appears. You can confirm the destinations to be deleted.
3
After you have finished selection, click Submit.
4
The Action Settings > Forward page appears. Check that the Destination is
deleted from the Destination List. After confirming the settings, click Submit.
FAX / i-FAX > FAX > Defaults
The description below provides a summary of the items displayed on the FAX /
i-FAX > FAX > Defaults page.
Local FAX Number (Port 1/ 2)
Specifies your FAX system number.
FAX Line
Sets the type of phone line to correspond to the type of telephone service
that you are using. Be sure that the type of phone line you select is correct
because, if the setting is incorrect, dialing will be impossible. The choices are
Tone (DTMF) or Pulse (10pps), or Pulse (20pps).
Local FAX ID
Specifies your FAX system ID.
Speaker Volume
Sets the volume of the internal speaker that allows you to listen to the other
party or to verify the conditions on the telephone line when the [On-Hook]
key was pressed. The choices are Off and levels 1 through 5.
Monitor Volume
Sets the volume of the internal speaker that allows you to verify the FAX
tones during FAX communication. The choices are Off and levels 1 through
5.
FAX / i-FAX > FAX > Receive
The table below provides a summary of the items displayed on the Receive
page.
FAX Receive
Selects the FAX reception mode. The choices are Auto (Normal, FAX/TEL,
TAD or DRD) or Manual. (The selectable option is different depending on
the destination.)
User Guide
6-24
To Next Page
Loading...
