Settings Pages
When all root certificates are deleted, the settings are made invalid if
Authentication Type is set to Certificates for IPSec. In addition,
IEEE802.1x is turned Off.
Application Certificate
IEEE802.1x Client Certificate
Displays whether the certificate is active.
Expiration
Displays the validity period of the certificate.
View Certificate
Click View to view details on the certificate.
Import Certificate
Click Import to open the File Import window. Click Browse to open the file
selection dialog box. Select a file and click Open. Enter the password and
click Submit. The certificate is imported.
Delete Certificate
Click Delete. The certificate is displayed. Click Delete again to delete the
certificate. When the certificate is deleted, IEEE802.1x is turned Off.
Printer Page
This section includes settings that apply to the printing function of the machine,
such as default print resolution or copy count.
Default printer settings will be overridden by the printer driver settings. Settings
that affect the machine entirely, such as locking the operation panel, are found
under Basic Page on page 6-4.
Printer > Summary of Network Printer Access Methods
The following information that has already been set is displayed here.
ā¢ IP Address
ā¢ Host Name
ā¢ Net BEUI Name
ā¢ AppleTalk Name
Printer > System
The table below provides a summary of the items displayed on the System
page.
Form Feed Timeout
Adjusts the timeout between 5 and 495 seconds, after which a form feed will
occur in the absence of data. The default setting is 30 seconds.
Emulation
Selects an emulation mode.
Alternate Emulation
Specifies which emulation mode should be used for processing at the time
data other than KPDL is received, when AUTO is selected for emulation.
JPEG/TIFF Print
COMMAND CENTER RX
6-11
To Next Page
Loading...
