WARNING
● The instrument is to be used only in its intended applications.
Understand and follow all the safety instructions contained in the
manual. Failure to follow the instructions may cause injury, instrument
damage and/or damage to the equipment under test. Kyoritsu is by no
means liable for any damage resulting from the instrument in
contradiction to these cautionary notes.
● Never attempt to make any measurements if the test leads and/or the
instrument has any structural abnormality, such as a crack or exposed
metal parts.
● Do not install substitute parts or make any modifications to the
instrument. Return the instrument to your local KYORITSU distributor for
repair or re-calibration in case of suspected faulty operation.
● Do not try to replace batteries if the surface of the instrument is wet.
● Connect the test leads firmly to the connectors.
● When replacing batteries, power off the instrument first, and then open
the battery compartment cover.
w ww . .com
information@itm.com1.800.561.8187
To Next Page
Loading...
Need help?
General
