Need help?Do you have a question about the KYORITSU KEW6024PV and is the answer not in the manual?
General| Brand | KYORITSU |
|---|---|
| Model | KEW6024PV |
| Category | Test Equipment |
| Language | English |
Explains safety standards for electrical environments (CAT O to CAT IV).
Critical safety hazards and precautions to avoid injury or damage.
Important advice for safe operation and preventing minor issues.
Describes symbols used on the instrument for user guidance.
Lists insulation resistance, earth resistance, and voltage measurement functions.
Details features like backlight, auto-off, and buzzer alerts.
Range, accuracy, and current for PV insulation measurements.
Specifications for voltage and earth resistance measurements.
Standards met, operating conditions, and power source.
Details operating uncertainty for different measurement types.
Identifies parts of the test lead, including clips and probes.
Describes buttons, LEDs, and the LCD on the instrument's panel.
Details the input/output terminals and their designations.
Explains various symbols and their meanings on the LCD.
Lists various test leads, probes, and interchangeable tips.
Includes optional cords, spikes, and carrying bags.
Covers USB adapters, software, carrying cases, and manuals.
Procedure to check the instrument's battery level indicator.
Instructions for attaching interchangeable tips and adapters to test leads.
General notes and critical safety warnings for PV insulation testing.
Steps for connecting leads, selecting functions, and performing measurements.
Procedures for preparing the PV circuit and setting measurement voltage.
Explains auto discharge and safety after measurement.
General guidance and safety advice for insulation testing.
Steps for setup, connection, and the measurement principle.
Details the output voltage specifications for compliance.
Critical safety warnings and the fall-of-potential method.
Steps for simplified measurement, including wiring and voltage checks.
Detailed connection and measurement steps for precision mode.
Checks for auxiliary earth resistance and potential issues.
Warning about exceeding the instrument's voltage limits.
Steps for connecting leads and selecting the voltage function.
How to check the LCD and interpret AC/DC readings.
Explains how the alarm compares results and notifies users.
Detailed steps to set reference values and alarm conditions.
Illustrates how the alarm status is shown on the LCD.
Details saved time, date, and location numbers for measurements.
Step-by-step guide to saving data, including the quick save option.
Instructions for retrieving and removing saved measurements.
Overall procedure for setting date and time.
Specific steps for adjusting the date and time.
Instructions for connecting and using the optical adapter and software.
Critical safety warnings before and during replacement.
Steps for replacing the instrument's batteries.
Procedure for connecting the shoulder strap to the instrument.
Instructions for placing the instrument into the soft case.
To Next Page
