Labconco FlaskScrubber 4121010 Series User Manual

22
4: Installation
With the installation site properly prepared, you are ready to unpack and install the
equipment. This section covers how to:
 Unpack and move the equipment
 Connect hot water supply
 Connect the pure water supply
 Connect the drain
 Connect electrical service
 Install the equipment
Unpacking
The following tools are required to unpack and install the equipment:
 Box knife
 9/16" wrench
 Flat-blade screwdriver
 Phillips screwdriver
 5/16” nut driver
 Carpenter level
The following safety precautions must be followed by all personnel unpacking the
equipment.
 Wear safety glasses
 Wear gloves
 No loose fitting clothes
 Wear close-toed shoes
 The cartoning allows for lifting with a mechanical lift truck or hand truck. If you
must lift the washer manually, use at least two (2) persons and follow safe lifting
guidelines.

Labconco FlaskScrubber 4121010 Series Specifications

General

Brand	Labconco
Model	FlaskScrubber 4121010 Series
Category	Dishwasher
Language	English