43
Program Screen
The Program Screen allows the user to view the parameters of all programs. New user-
defined programs can be created, edited or deleted from this screen. All factory
programs are locked and cannot be edited, but any program can be copied, renamed
and then modified. See Fig. 6-4. All changes to non-factory programs will be stored in
memory until modified or deleted.
If a FACTORY RESET is performed, all user programs will be erased and the factory
settings will be reinstated.
Fig. 6-4 shows the Program Screen. To edit, copy, or delete a program, first touch the
desired program to highlight it. In Fig. 6-4 the program “Extreme” is highlighted. To
create a new program, touch [New].
Fig. 6-5 illustrates the user-customizable program parameters and limits for each
segment.
By adding the optional Detergent Dispense Kit (Catalog Number 4587500), a second
Wash (Wash2) can be programed, and liquid detergent can then be dispensed in any
wash segment (0-100ml).By adding the optional Rinse Aid Dispense Kit (Catalog
Number 4595120), rinse aid can be dispensed in any rinse segment (0-40ml).
The Auto Dispense Kit, which includes both the Detergent and Rinse Aid Dispense
systems, is also available (Catalog Number 4679700).
Figure 6-4
To Next Page
Loading...
Need help?
General
