58
Once the SMTP Settings (for the washer’s e-mail address) have been correctly entered,
and the notification e-mail address (e-mail address for who is getting notified) has been
correctly entered and tested, the final step is to select the alerts to send the each e-mail
address. Follow these instructions to select alerts.
1. Touch [Alerts] next to the email address. A pop-up displays the alert options:
o Program Complete
o Status Every 15 min / 30 min / 1 hour / 2 hour
o All Alerts
o Power Fail
2. Select the desired alerts. Only one Status alert frequency selection can be
made. For example, if Status Every 15 min is selected, the other three
frequency status alerts are inactive.
3. Touch [OK].
To delete a user’s email:
o Touch the e-mail address to delete, it will highlight.
o Touch the Delete icon in the bottom left corner of the screen.
Figure 6-19
Settings
Add
Delete
To Next Page
Loading...
Need help?
General
