Appendix F: BACnet
Product Service 1-800-522-7658
Explanation of ETH1000
The ICC device (ETH-1000) is connected to the local network with a RJ45 cable as well
as the GFH. It collects the data from all GFH from its own memory GFH client (preset by
Labconco onsite) and provides the information as objects. A list of objects provided by
the device is in the product documentation. These objects can be collected by a BAS
Operating Workstation (BOW) according to its own protocol. BOW is then able to
generate alarms and email notifications.
To Next Page
Loading...
