Labrie automizer Operator's Manual

62 Operating the AUTOMIZER
TM
RECYCLER
3. Make sure the right-hand side hopper door is closed before loading recyclable materials into the
hopper.
4. Unlock the swivel arm from its resting position along the hopper (see Swivel Arm on page 58).
5. Unfold the swivel arm towards the front of the vehicle and lock the arm (see Figure 4-21 and
Figure 4-23).
6. Connect both hydraulic hoses to the container (see Figure 4-22).
7. Lower the hopper bucket using the bucket control lever on the swivel arm (see Figure 4-20).
Figure 4-20 Bucket control lever
Warning!
Do not drive the vehicle with the hopper door open.
Warning!
Do not get into the hopper whilst operating the bucket or the crusher panels.
Warning!
Make sure the right-hand side hopper door is closed before operating the hopper
bucket.

Labrie automizer Specifications

General

Brand	Labrie
Model	automizer
Category	Automobile
Language	English