EasyManua.ls Logo

Lagoon 620 - 2.1 Construction Details

Lagoon 620
120 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
21
LAGOON 62O
2.3 Access to the fly helm stations
You will have access to the fly helm stations with stairs from the
cockpit.
You can slide shut this access.
The opening of the access hatch to the fly can be electrically-
operated (optional extra).
The electric opening operates on 24 V (the 24 V / 12 V inverter switch
being on).
Regularly rinse the slide rails with fresh water.
2.4 Cockpit table
You can install the cockpit table de cockpit either in high or low
position.
Change its legs (stored in a cockpit locker) to pass from one position
to the other.
2.1 Construction
The LAGOON 620 is made of balsa cored sandwich and made under
vacuum using quadraxial glass roving and resin-impregnated marine
plywood.
The deck is made of balsa cored sandwich with plywood inserts
where deck fittings are installed. The deck to hull joint is glued and
screwed.
2.2 Companionway door
The sliding door can be locked in three different positions : closed,
ajar (airing position) and open.
You can lock it from the inside of the saloon with a latch on the jamb
of the door.
HULL / DECK
HULL
DECK
2
RECOMMENDATION
While sailing, block the sliding door locking it.
AVERTISSEMENT
Do not let the hull's large plexiglass windscreens come
into contact with fenders or hawsers: surface damage
would be irreparable.

Table of Contents

Other manuals for Lagoon 620

Related product manuals