SmartShop|Maker Owner’s Manual
11
2.0 Receiving the Machine
Following delivery and before the driver and riggers have left, inspect the packing, invoice, and
shipping documents. Next, ensure there is no visible damage to the packaging or the machine. All
damage must be noted on the delivery documents and signed by the receiver and the delivery
driver. Contact Laguna Tools Customer Service as soon as possible in case of damage. It is
advisable to photograph and document any shipping damage. The original packaging is required
to return damaged equipment to Laguna Tools.
NOTE
Sawdust may be found in the machine upon arrival. This is
because the machine has been tested prior to shipment from
the factory and/or Laguna Tools. Laguna Tools tests all
machines prior to shipping, but some adjustments may have
to be undertaken by the customer. These adjustments are
covered in the various sections of this manual.
Most large machinery will be delivered on a tractor trailer 48 to 53 feet long. Please notify a Sales
Representative with any Delivery Restrictions. The customer is required to have a forklift (6000
lbs. or larger is recommended) with 72-inch tynes or tyne extensions.
To Next Page
Loading...
