Lainox Heart X - Change a Stored Program; Saving Changes to a Stored Program

37
90024570rev00
14 • PROGRAMS
14.5 - CHANGE A STORED PROGRAM
F
AST DR
Y
CYCLES
40 %
7'
180°
Crepes
02/
02
Before loading
preheat oven
• All the settings of an existing program can
be changed.
According to your requirements, change
the parameters for:
- Temperature,
- Time/Core temperature,
- Fast Dry/Autoclima,
- Fan speed,
for the program cycle displayed, simply by
pressing the relative symbol on the touch
screen and turning the Scroller+ to the
desired value, then confirm the selection
by pressing the Scroller+.
• To move on to the next cooking cycle,
press the “Cycles” key on the touch screen
and turn the Scroller+ until the next cycle
number appears, then confirm by pressing
the Scroller+.
Personalize the parameters as for the
previous cycle.
• Save the changes by pressing the “Save”
key.
A selection window will appear, allowing
you to choose from:
- Save modification
- Save with name
- Rename
FAS
T DR
Y
FAS
T DR
Y
F
AST DR
Y
CYCLES
40 %
7'
180°
Crepes
02/
02
Before loading
preheat oven
Save modification
Save with name
Rename
CYCLES
14.6 - SAVING CHANGES TO A STORED PROGRAM
Crepes
CYCLES
02
10
'
130°