LaMotte TC-3000 - Turbidity Setup; Selecting Turbidity Units; Selecting a Turbidity Calibration Curve

4. Press the *IOK to select Units. Turbidity
*Units
Calibration
16:02:19 01/04/05
5. Scroll down and then press *IOK
to select units.
Available units are: NTU
(Nephelometric Turbidity Units);
FNU (Formazin Nephelometric
Units); ASBC (American Society of
Brewing Chemists); EBC (European
Brewery Convention)
Units
*NTU
FNU
ASBC
EBC
16:02:19 01/04/05
Note: If Attenuation is chosen as a calibration curve. The result will be reported in
FAU (Formazin Attenuation Units).
6. Press  to exit to a previous menu or
make another menu selection or
press OFF to turn the meter off.
SELECTING A TURBIDITY CALIBRATION CURVE
1. Press ON to turn the meter on.
1.3
2. Scroll down and then press *IOK to
select Options.
Main Menu
Measure
Date
* Options
16:02:19 01/04/05
26 OPTIONS & SETUP • TURBIDITY