CHLORINE
The default units are ppm and the default calibration curve is for DPD Tablet reagents.
To change the settings:
SELECTING CHL ORINE UNITS
1. Press ON to turn the meter on.
1.3
2. Scroll down and then press *IOK
to select Options.
Main Menu
Measure
Date
* Options
16:02:19 01/04/05
3. Scroll down and then press *IOK
to select Chlorine.
Options
Averaging
Turbidity
* Chlorine
Date/Time
16:02:19 01/04/05
4. Press the *IOK to select Units. Chlorine
*Units
Calibration
16:02:19 01/04/05
5. Scroll up and then press *IOK to
select a unit for the chlorine results.
Available options are: mg/L
(milligrams per liter) or ppm (parts
per million)
Units
*mg/L
ppm
16:02:19 01/04/05
28 OPTIONS & SETUP • CHL ORINE
To Next Page
Loading...
