EasyManua.ls Logo

LaMotte TC-3000 - Detector; Response Time; Signal Averaging; Sample Chamber

LaMotte TC-3000
80 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Detector: Turbidity: Photodiode, centered at 90°, maximum peak
550 nm, TC-3000e;
Photodiode, centered at 90° TC-3000i
Color: Photodiode
Chlorine: Photodiode
Light Source
Stabilization:
Automatic
Response Time: <5 seconds
Signal Averaging: Turbidity and color
Sample Chamber: Accepts 25 mm flat-bottomed test tubes
Sample: 10 mL in capped tube
Display: Graphic Liquid Crystal Display
Software: Data Logging: 4004 points
Auto Shut-off: 5, 10, 30 min, disabled
Calibration: Field adjustable, 2-points
Languages: English, French, Spanish, Japanese (Kana), Portuguese, Italian
Temperature: Operation: 0–50 °C; Storage: -40–60 °C
Operation Humidity
Range:
0–90 % RH, non-condensing
Auto Shutdown: 0, 5, 10 or 30 minutes
Power Source*: Battery Operation: 9 volt alkaline
Line Operation: Input: 100-240VAC/50-60Hz with imbedded
IEC socket (2 pin)
Output: 9VDC REG 1.2A with 2.1 x 5.5 mm output plug center
positive
Battery Life: >250 tests, T C-3000e
>2500 tests, TC-3000i
(with signal averaging disabled)
Dimensions
(LxWxH):
8.5 x 16.2 x 16.7 cm; 3.4 x 6.4 x 2.6 inches
Weight: 339 g, 12 oz (meter only)
Serial Interface: RS232, 8 pin mDIN, 9600b, 8, 1, n
*CE Mark: The devise complies to the product specifications for the Low Voltage
Directive when furnished with the 100-240V AC Adapter (Code 1754).
SPECIFICATIONS 7

Table of Contents

Other manuals for LaMotte TC-3000

Related product manuals