SCS100/200/400 User Guide 5: Installation
Select the Assignment Method
4. Select Assign Specific IP and click Next. The Assign address – IP Settings window
displays.
Enter IP Settings
5. Enter the IP-related settings:
a) For IP Address, enter the desired IP address.
b) For Subnet Mask, change the values provided only if you wish to use a mask
other than the default. The default value should be correct in most cases.
6. For Gateway Address, select None.
7. Click Next. The Assign IP address – Assignment Status window displays.
5-3
To Next Page
Loading...
Need help?
General