Lantronix UDS2100 User Manual

3: Installation of UDS2100
UDS2100 Device Server User Guide 17
IP Address: _______ - _______ - _______ - _______
Subnet Mask: _______ - _______ - _______ - _______
Gateway: _______ - _______ - _______ - _______
You have several options for assigning an IP address and related network
settings to your unit. This chapter provides information about using the
DeviceInstaller (graphical user interface) and serial port login (command line
interface) methods.
Note: For information about other methods of assigning the IP address,
such as DHCP, AutoIP, ARP, and Telnet, see E: Alternative Ways to
Assign an IP Address.

Lantronix UDS2100 Specifications

General

Isolation	1.5 kV
Certification	FCC, C/UL, CSA, VCCI, CE, TUV, CTick
Serial interface type	RS-232/422/485
Serial ports quantity	2
Ethernet LAN data rates	10, 100 Mbit/s
Electrostatic Discharge (ESD) protection	15 kV
USB 2.0 ports quantity	0
Supported network protocols	ARP, UDP, TCP, ICMP, Telnet, TFTP, AutoIP, DHCP, HTTP, SNMP TCP, UDP, Telnet, TFTP, RFC2217
Built-in processor	Lantronix DSTNI-EX
Processor frequency	48 MHz
Compatible operating systems	Windows 98/ME/NT/2000/XP
Flash memory	2 MB
RAM capacity	0.256 MB
LED indicators	LAN, Y
Storage temperature (T-T)	-40 - 85 °C
Operating temperature (T-T)	0 - 60 °C
Operating relative humidity (H-H)	10 - 90 %
Input voltage	9 - 30 V

Weight and Dimensions

Weight	400 g
Dimensions (WxDxH)	72 x 23 x 95 mm