Lantronix xDirect User Manual

5: Configuration Using Web Manager
xDirect User Guide 35
Apply Settings
1. To save and apply the configuration changes to the device server, click the Apply Settings
button.
Note: Clicking OK on each page does not change the configuration on the device.
Clicking the OK button tells the xDirect what changes to use; the Apply Settings button
makes the changes permanent and reboots the xDirect.
Apply Defaults
1. Click the Apply Defaults button to set the device server back to the default settings. For
details see Default Settings (Option 7).
2. Click Yes to set factory settings, or click No to cancel.
Figure 5-9 Apply Settings and Apply Defaults

Lantronix xDirect Specifications

General

Manual	Yes
Quantity per pack	1 pc(s)
Connector 1	RS232/422/485
Connector 2	DB9F
Connector 1 gender	Female
Certification	CE, RoHS
Product color	Black, Silver
Sustainability certificates	RoHS
Input voltage	100 - 240 V