Lantronix xDirect User Manual

9: Setup Mode: Advanced Settings
xDirect User Guide 60
Channel 1 Configuration Defaults
Expert Settings Defaults
Security Settings Defaults
Baudrate 9600
I/F Mode 4C (1 stop bit, no parity, 8 bit, RS-232C)
Flow 00
TCP port number 10001
Connect Mode C0 (always accept incoming connection; no active connection startup)
Send ‘+++’ in Modem Modem Enabled
Show IP addr after ‘RING’ Enabled
Auto increment source port Disabled
Hostlist retry counter 3
Hostlist retry timeout 250 (msec)
Start Character 0x0D (CR)
All other parameters 0
TCP Keepalive time in s 45
ARP Cache timeout in s 600
CPU Performance 0 (Regular)
Disable Monitor Mode @
bootup
No
HTTP Port Number (1-65535) 80
MTU Size (512 – 1400) 1400
TCP Re-transmission
Timeout (500-4000)
500 (ms)
Alternate MAC Disabled ( for OEM use only)
Ethernet Connection Type 0 (auto-negotiate)
Disable SNMP No
SNMP community name public
Disable Telnet setup No
Disable TFTP Firmware Update No
Disable Port 77FEh No
Disable Web Server No
Disable Web Setup No
Disable ECHO ports Yes
Enable Enhanced Password No

Lantronix xDirect Specifications

General

Manual	Yes
Quantity per pack	1 pc(s)
Connector 1	RS232/422/485
Connector 2	DB9F
Connector 1 gender	Female
Certification	CE, RoHS
Product color	Black, Silver
Sustainability certificates	RoHS
Input voltage	100 - 240 V