3: Using DeviceInstaller
XPort® Device Server User Guide 19
Subnet Mask
Non-configurable field. Displays the XPort module’s current
subnet mask. To change the subnet mask, see Assigning an IP
Address on page 16.
Gateway
Non-configurable field. Displays the XPort device’s current
gateway. To change the gateway, see Assigning an IP Address
on page 16.
Number of COB partitions
supported
Non-configurable field. Displays the number of COB partitions
supported.
Non-configurable field. Displays the number of ports on the
XPort module.
TCP Keepalive
Non-configurable field. Displays 1-65s, the XPort device
server’s TCP keepalive value. The default setting is 45.
Non-configurable field. Indicates if Telnet sessions.
Non-configurable field. Displays the XPort module’s port for
Telnet sessions.
Web Port
Non-configurable field. Displays the XPort device server’s port
for Web Manager configuration.
Maximum Baud Rate Supported
Non-configurable field. Displays the XPort module’s maximum
baud rate.
Note: the XPort unit may not currently be running at this rate.
Firmware Upgradeable
Non-configurable field. Displays True, indicating the XPort
module’s firmware is upgradeable as newer version become
available.
Supports Configurable Pins
Non-configurable field. Displays True, indicating configurable
pins are available on the XPort device server.
Supports Email Triggers
Non-configurable field. Displays True, indicating email triggers
are available on the XPort module.
Supports AES Data Stream
Non-configurable field. Displays True, if the XPort unit (certain
part numbers) supports AES encryption.
Supports 485
Non-configurable field. Displays True. XPort module supports
the RS-485 protocol.
Supports 921K Baud Rate
Non-configurable field. Displays True. XPort device server
supports baud rates up to 921600 bits per second (bps).
Supports HTTP Server
Non-configurable field. Displays True.
Supports HTTP Setup
Non-configurable field. Displays True.
Supports 230K Baud Rate
Non-configurable field. Displays True.
Supports GPIO
Non-configurable field. Displays True, indicating the XPort
module supports General Purpose Input Output (GPIO).