Preparations
14
5 Preparations
5.1 Assembly and setting up
☞
− Place the unit on a flat surface
− After transport and before starting up, store it
standing in upright position for two hours if
possible.
− Do not cover the ventilation openings at the
back of the unit and ist lower part.
Keep clear distance of at least 40 cm.
− Adjust the pump setting knob so that when
using the unit as bath thermostat (no external
circulation) the flow emerges at the opening for
the bath circulation, or link together the pump
connections.
(See ill. 3).
Operation with external consumer (circulation
thermostat) (➾Section 5.4.)
Adjustments of the pump outflows (➾Section 5.4.)
Ill 1
Pump setting knob turned
anticlockwise
Ill 1
Pump setting knob medium
position
Ill 3.
Pump setting knob turned
clockwise
To Next Page
Loading...