Starting up
15.05.01
YACE0060
25
6.4.4 Parameters
and 3x
− Directly from level 0 (setpoint selection) press the key
combination on the left, or
− forward with the key from function setpoint resolution.
− Here it is possible to switch over to level 2. Press the key
on the left, continue with Section 6.4.4.1. or
− with key to step END.
− End of the menu.
− Return to level 0 (setpoint selection) with the key on the
left, or
− with key back to "Setting the setpoint resolution".
To Next Page
Loading...