Maintenance
18.03.03
YACE0060
39
8.2.1 Maintenance of the refrigeration unit
The refrigeration unit operates largely without maintenance. Depending on the ambient dust conditions
and the operating time, any dust on the heat exchanger (condenser) must be removed at intervals on 2
weeks or longer. This is done after taking off the front grille. Brush off the condenser and if necessary
blow through with compressed air.
8.2.2 Note on repair and disposal
The refrigeration circuit is filled with a CFC-free refrigerant. Type and charging quantity are indicated on
the unit. Repair and disposal by a qualified refrigeration engineer only!
If the equipment does have to be returned to the factory, it may only be necessary to dismantle the
thermostat unit and return it.
☞
− If the equipment has to be returned to the factory, please ensure that it is carefully and
properly packed. LAUDA accepts no responsibility for damage due to unsatisfactory
packing.
8.3 Ordering spares
When ordering spares please quote instrument type and serial number from the rating label. This avoids
queries and supply of incorrect items.
The capital letter of the serial number (first position) shows the year of manufacture, e.g.
Y = 2000, Z = 2001, A = 2002; B = 2003
We shall always be happy to deal with queries and to receive suggestions and criticism.
LAUDA DR. R. WOBSER
GMBH & CO.KG
P.O. Box 1251
97912 Lauda-Königshofen
GERMANY
Phone: (+49) (0) 9343/ 503-0
Fax: (+49) (0) 9343/ 503-222
E–mail info@lauda.de
Internet http://www.lauda.de
To Next Page
Loading...