Safety notes
18.03.03
YACE0060
37
• Depending on the bath liquid used and the mode of operation it is possible for toxic vapours to be
produced. Ensure appropriate ventilation!
• When changing the bath liquid from water to oil, for temperatures above 100 °C, carefully remove all
traces of water, also from tubing and from the external consumer, otherwise ! danger of burns
through delayed boiling!
• Always pull out the mains plug before cleaning, maintenance or moving the thermostat!
• Repairs on the control unit and the refrigeration system must be carried out by properly qualified
personnel only
• Values for temperature control and indicating accuracy apply under normal conditions according to
DIN 12876. High-frequency electromagnetic fields may under special conditions lead to unfavourable
values. This does not affect the safety.
To Next Page
Loading...