Specification Description
Filling charge I: Filling weight of the refrigerant and corresponding size of the CO
2
equivalent in tonnes.
PS high pressure l: Maximum permissible working pressure on the high-pressure side
of the refrigeration circuit (compression, condensation)
PS low pressure l: Maximum permissible working pressure on the low-pressure side
of the refrigeration circuit (expansion, evaporation)
Refrigerant ll: Refrigerant used in refrigeration circuit 2 of the appliance for
cooling. The global warming potential (GWP) of the refrigerant is
given in brackets.
Filling charge ll: Filling weight of the refrigerant and corresponding size of the CO
2
equivalent in the second stage.
PS high pressure ll: Maximum permissible working pressure on the high-pressure side
of the refrigeration circuit (compression, condensation)
PS low pressure II: Maximum permissible working pressure on the low-pressure side
of the refrigeration circuit (expansion, evaporation)
Voltage: Permissible power supply
Power consumption: Current consumption of the device
Protection class: IP protection level of the device
Class acc. to DIN 12876-1: According to DIN 12876-1, the device has the classification
V6Integral Process Thermostats and High-Temperature Thermostats30 / 198
To Next Page
Loading...