Lauda IN 130 T User Manual

Please note:
n No segments can be added or deleted in a currently running program.
n In the running program, changes of the existing temperature values
and segment durations are possible. The segment is continued as if the
change had been eective since the beginning of the segment.
n If the new segment time is shorter than the elapsed segment time, the
program jumps to the next segment.
1. Select the Edit
menu item for the running program.

You can edit the segments.
6.19 Set time, date, format and time zone
The set time zone is used to convert between UTC (Universal Time Coordi-
nated) and local time. The internal real-time clock runs in the Integral device
according to UTC. The conversion then leads to the automatic changeover
from standard time to daylight saving time and vice versa, since this is
country-dependent. The leap years are independent of this setting as they
are already included in the UTC. These entries with fixed dates for the
coming decades are also included for countries that base their time zone
oset on religious specifications.
UTC is also needed to obtain the time from the network because the time
and date of NTP time servers are always supplied in UTC only. However, for
this to work at all, the LAUDA device must be assigned an NTP time server
via DHCP.
If DHCP is switched o and the IP address is permanently configured,
automatic time tracking is not possible. (  Basic setup  Ethernet  LAN
configuration  DHCP client)
Only change the time/date if you have previously set the time zone. Other-
wise, the local time may change due to the changed time zone oset when
the time zone is changed.
Personnel:
n
Operating personnel
You can display the date in two formats.
n Setting [DD.MM.YYYY] means days, month and year are displayed in
this order (European).
n Setting [MM - DD - YYY] means month, day and year are displayed in
this order (US English).
1. Press the Enter key to open the menu.
2.
Select the menu items  Clock  Date format.

A list containing the settings opens.
3.
The following options are available in the window:
n Format [DD.MM.YYY]
n Format [MM - DD - YYYY]

The new setting is valid with immediate eect.
Editing a program currently running
Set time format
Set time format
Fig. 67: Selecting options
V6Integral Process Thermostats and High-Temperature Thermostats114 / 198

Lauda IN 130 T Specifications

General

Brand	Lauda
Model	IN 130 T
Category	Thermostat
Language	English