Personnel:
n
Operating personnel
Protective equipment:
n
Safety glasses
n
Protective gloves
n
Protective work clothing
1. Press the Enter key to open the menu.
2.
Select the menu items Pump Pump Level.
The pump levels 1 to 8 are displayed. The currently active pump
level is displayed inverted.
3. Select one of the pump levels displayed.
The selected pump level is activated automatically. It does
not have to be activated separately.
4. With the [ESC] softkey, you return to the home window, or, with the
left arrow key [<], you return to the Pump menu.
5.8 Control parameters
The thermal mass and the thermal connection of the application to the
thermostat may make it necessary to adjust the control parameters.
Only modify the control parameters if you possess adequate knowl-
edge of control system engineering.
Setting the pump level
V6 Integral Process Thermostats and High-Temperature Thermostats 79 / 198
To Next Page
Loading...
Need help?
General
