Safety & Accessory
Initial UseDiagnosticsFAQ & Care
Product Prole
19
www.x431.com +86 755 8455 7891
LAUNCH
PAD VII
User Manual
.
.
to choose it from the record list.
to enter it manually.
Tap
to switch the camera to barcode pattern recognition mode.
After scanning, the screen automatically displays the result.
OK
remote server, the system will enter the vehicle information screen.
REPEAT.
OK, the system will automatically identify the vehicle model and directly navigate
to the vehicle information page.
Note: In general, vehicle idencaon numbers are standardized - all contain 17 characters. VIN characters may
be capital leers A through Z and numbers 1 through 0; however, the leers I, O and Q are never used in order to
avoid mistakes of misreading. No signs or spaces are allowed in the VIN.
To Next Page