Safety & Accessory
Initial Use
Diagnostics
FAQ & Care
Product Prole
26
www.x431.com +86 755 8455 7891
LAUNCH
PAD VII
User Manual
5.2.3.2 System Scan
This option allows you to quickly scan which systems are installed on the vehicle.
Tap System Scan on the test item selection screen, the system starts scanning the systems. Once the
scanning is complete, the screen will display the result.
Tap the desired system to advance to the test function selection page. For detailed operations on test
function, please refer to Chapter 5.2.3.3 System Selection.
5.2.3.3 System Selection
This option allows you manually select the test system and function step by step.
Tap System Selection on the test item selection screen, the following screen will appear:
Swipe the screen from the bottom to view the vehicle system on the next page.
Tap the desired system (take ECM
Note: Dierent vehicle has dierent diagnosc menus.
A. Version Information
B. Read Fault Code
Tap Read Fault Code on the test function selection screen, the screen will display the diagnostic result.
To Next Page
Loading...
