Safety & Accessory
Initial Use
Diagnostics
FAQ & Care
Product Prole
28
www.x431.com +86 755 8455 7891
LAUNCH
PAD VII
User Manual
Select Page: Tap to select all items of the current page.
Select All: Tap to select all items. To select certain data stream item, just check the box before the item
name.
Unselect: Tap to deselect all data stream items.
OK
After selecting the desired items, tap OK to enter the data stream reading screen.
Notes:
1. Tap
, the following popup will appear.
Here the user can set different display style for each selected
item.
indicates sticky top. If it is tapped, it will change into . On
the data stream display screen, the data stream item with
will
be shown on the top of the selected data stream list. To remove
it from the top of the list, just tap it again.
B indicates this item will be displayed in Bold.
A indicates this item will be displayed in Red.
2. Tap English or Metric to switch the measurement unit.
3. If the value of the data stream item is out of the range of the standard (reference) value, the whole line will
display in red. If it complies with the reference value, it displays in blue (normal mode).
4. The indicator 1/X shown on the boom of the screen stands for the current page/total page number. Swipe the
screen from the right/le to advance/return to the next/previous page.
There are 3 types of display modes available for data viewing, allowing you to view various types of
parameters in the most suitable way.
Value – this is the default mode which displays the parameters in texts and shows in list format.
Graph – displays the parameters in waveform graphs.
To Next Page
Loading...
