Safety & Accessory
Initial Use
Diagnostics
FAQ & Care
Product Prole
54
www.x431.com +86 755 8455 7891
LAUNCH
PAD VII
User Manual
A. For LAUNCH Wi-Fi mini printer, follow the steps below to connect the printer.
1. Tap Printer Set.
2. For initial use, you are suggested to reset the printer: Press and hold [MODE] & [FEED] for 8 seconds,
the following resetting command will be printed out:
ok
rebooting...
3. Tap Reset
Step 1: Connect the printer:
Tap Scan
Connect to enter Step 2.
Step 2: Join the Wi-Fi printer into LAN:
Tap Scan
Conrm.
4. Once the Wi-Fi network of the printer is connected and the printer is found, tap Printing test to test the
printing.
Now you can use the Wi-Fi printer to print!
check whether the current device and the printer are on the same LAN.
2. Tap Connect to Printer:
Test Print directly to test the printing.
Follow the steps below to proceed:
1. Set the default printer as System.
2. Go to Settings -> Network & Internet -> Wi-Fi
.
To Next Page
Loading...
