Network HDD Recorder User Manual
40
You can save slideshow content in your HDD, USB or network
folders as long as all the desired photos are loc ated in the same folder.
2. Press the Setup button on the remote control or select Enter Setup
Menu from the Main menu.
3. Select Change Photo Options Slide Show Timing and press
.
4. Select the interval between slides from 2 seconds to 5 minutes and
press
.
The default interval, Off, disables the slideshow feature.
5. Select a Transition Effect to customize the transition between slides.
For example, selecting Left to Right replaces the next image over the
current image by sliding from the left side of the screen to the right.
6. Select Background Music to add a musical background to the slide
show:
Off - no musical background
Folder - the background files MUST be located in the same folder
as the photo content
Playlist - the background files are played from a Playlist.
See Creating a Playlist on page 37.
7. Navigate to the desired photo directory and pr ess to start the
slideshow.
Renaming Photo files
You can only rename content from a FAT32 partition. NTFS content
is read-only.
Using the remote control or navigation buttons on the front panel of
the recorder, select the desired media in the Navigation panel and
press on the remote control.
Select Rename from the submenu and press
.
The virtual keyboard displays.
Enter the new name using the Navigation panel and select OK.
The media is renamed and the Photo menu displays.
To Next Page
Loading...
Need help?
General