Wired LAN Setup
Your Network HDD Recorder supports conne ction to the LAN through DHCP
IP or Fixed (Static) IP.
Using DHCP IP
To configure a LAN connection using DHCP IP, perform the following steps:
Ensure that all cable connections are secure and that the local network is active.
Using the remote control or na vigation buttons on the front panel of
the recorder, select Wired LAN Setup and press .
Select DHCP IP (Auto) and press
. DHCP (AUTO) displays.
Select OK and press
. Save Network Setting displays.
Select OK and press
. A testing screen displays.
When the test is complete, the Network Options screen displays.
A successful connection is established when ON and an IP
address display in the submenu.
Using Fixed IP
To configure a LAN connection using Fixed IP, perform the following steps:
1.
Ensure that all cable connections are secure and that the local network is active.
2. Using the remote control or navigation buttons on the front panel of
the recorder, select Wired LAN Setup and press .
To Next Page
Loading...
Need help?
General