8–31
SMART TRIGGER — Glitch — Pattern (NOT ON 9304C, 9310C, 9314C SERIES)
When “Pattern” is selected in Glitch mode, the instrument triggers
on the logic AND of up to five sources.
type
To select “Glitch”.
trigger on
To select “Pattern” (four-channel menu shown).
for pattern
For selecting pattern “Present” or “Absent”.
width ≤
To trigger if the pattern is present or absent for less than the time
value defined in that field. The value can be adjusted with the
associated menu knob and the test commuted to “≥” by pressing the
corresponding menu button.
& width ≥
To trigger if the pattern is present or absent for more than the time
value defined in that field. The value can be adjusted and the test
commuted to “≤ ” as per “width ≤ ”.
To Next Page
Loading...
Need help?
General
