|
|
System Commands 5
DISPLAY
DUAL_ZOOM, DZOM
Command/Query
DESCRIPTION
COMMAND SYNTAX
QUERY SYNTAX
Response format
EXAMPLE (GPIB)
RELATED COMMANDS
By setting DUAL ZOOM ON, the horizontal magnification and
positioning contro’[s apply to all expanded traces simultaneously.
This command is useful if the contents of all expanded traces are
to be examined at the same time.
The DUAL_ZOOM? query indicates whether multiple zoom is en-
abled or not.
Note: This command has the same effect as MULTIZOOM.
Dual ZOoM <mode>
<mode> := {ON, OFF}
Dual_ZOoM?
Dual ZOoM <mode>
The following example turns dual zoom on.
CMD$="DZOM ON": CALL IBWRT(SCOPE%,CMD$)
HOR_MAGNIFY, HOR_POSITION, MULTIZOOM, ZOOM
79
To Next Page
Loading...
