LeCroy WaveJet 300A series - Cooling Requirements; AC Power Source and Connections

To Next Page

To Previous Page

WaveJet 300A Remote Control Manual

917976 Rev A 11

<NR2 NUMERIC RESPONSE DATA> No

<NR3 NUMERIC RESPONSE DATA> Yes

<HEXADECIMAL RESPONSE DATA> No

<BINARY NUMERIC RESPONSE DATA> No

<STRING RESPONSE DATA> No

<DEFINITE LENGTH ARBITRARY BLOCK

RESPONSE DATA>

Yes

<INDEFINITE LENGTH ARBITRARY BLOCK

RESPONSE DATA>

2.10 Device-to-device message transfer traffic that does not follow the rules for <RESPONSE

MESSAGE> elements

None.

2.11 Size of block data responses

Block data response is made for DTWAVE query, DTSTUP query, and TSCRN query.

Table 2-6. Size of block data responses (MLEN 500K,

DTPOINTS 500000 and DTSTART 0)

Query Status Size of block data

DTWAVE? Normal Sampling 500,010 bytes

DTWAVE? Average Sampling 1,000,010 bytes

DTWAVE? Multiplication Wave 2,000,010 bytes

DTWAVE? Other Sampling 500,010 bytes

DTSTUP? (Constant) 476 bytes

TSCRN? TIFF 308,956 bytes

TSCRN? BMP 308,288 bytes

TSCRN? PNG (Variable)

2.12 List of common commands and queries which are implemented

Table 2-7. List of common commands and queries

Mnemonic Name Implemented?

*AAD Accept Address Command No

*CAL? Calibration Query No

*CLS Clear Status Command Yes

*DDT Define Device Trigger Command No

*DDT? Define Device Trigger Query No

*DLF Disable Listener Function Command No

*DMC Define Macro Command No

*EMC Enable Macro Command No

*EMC? Enable Macro Query No

*ESE Standard Event Status Enable Command Yes

Other manuals for LeCroy WaveJet 300A series