LeCroy WaveJet 300A series - Safety Requirements and Precautions; Safety Symbols and Terms

To Next Page

To Previous Page

WaveJet 300A Remote Control Manual

2.6 Functional elements used in constructing device-specific commands

Whether <compound command program header> elements are used must also be included.

Table 2-2. Device listening functional elements

Element Implemented?

<PROGRAM MESSAGE> Yes

<PROGRAM MESSAGE TERMINATOR> Yes

<PROGRAM MESSAGE UNIT> Yes

<PROGRAM MESSAGE UNIT SEPARATOR> Yes

<COMMAND MESSAGE UNIT> Yes

<QUERY MESSAGE UNIT> Yes

<COMMAND PROGRAM HEADER> Yes

<QUERY PROGRAM HEADER> Yes

<PROGRAM HEADER SEPARATOR> Yes

<PROGRAM DATA SEPARATOR> Yes

<PROGRAM DATA> Yes

<DECIMAL NUMERIC PROGRAM DATA> Yes

<CHARACTER PROGRAM DATA> Yes

<SUFFIX PROGRAM DATA> Yes (see Figure 2-1)

<NON-DECIMAL NUMERIC PROGRAM DATA> No

<STRING PROGRAM DATA> No

<ARBITRARY BLOCK PROGRAM DATA> Yes

<EXPRESSION PROGRAM DATA> No

Figure 2-1. <SUFFIX PROGRAM DATA> element

• Enter <white space> according to IEEE488.2.

• Enter <suffix mult> in <upper/lower case alpha> according to IEEE488.2.

• Enter <suffix unit> according to IEEE488.2.

The following combinations only can be used for <compound command program header>.

917976 Rev A 9

Other manuals for LeCroy WaveJet 300A series