MPC2810 Motion Controller Hardware Manual
II
The content of this manual has been carefully prepared and is believed
to be accurate. However, no responsibility is assumed for
misunderstanding and inaccuracies.
Leetro Automation Co., Ltd. reserves the right to make changes
without further notice to any products herein to improve reliability,
function or design. Leetro Automation Co., Ltd. does not assume any
liability arising out of the application or use of any products or
circuitry described herein; neither does it convey any license under its
patent rights of others. Both Step-Servo™ and Leetro™ are trademark
of Leetro Automation Co., Ltd.
Leetro’s general policy does not recommend the use of its products in
life support or aircraft applications wherein a failure or malfunction of
the product may directly threaten life or injury. Per Leetro’s terms and
conditions of sales, the user of Leetro Automation Co., Ltd. products
in life support or aircraft applications assumes all risks of such use and
indemnifies Leetro Automation Co., Ltd. against all damages.
Contact
Leetro Automation Co., Ltd.
Building 8-B
Dayi Zone of Incubating Hi-tech
No.1 South 2
nd
Keyuan Road
Chengdu 610041
CHINA
Internet: http://www.leetro.com
Email: overseas@leetro.com
Tel: +86 28 85142599
FAX: +86 28 85187774
©2010 by Leetro Automation Co., Ltd. All Rights Reserved
To Next Page
Loading...
Need help?
General
