Leetro MPC2810 - Software Management; Uninstalling Software; Software Update Procedure

MPC2810 Motion Controller Hardware Manual
20
“MPC2810.lib”).
C. Reference Doc: Hardware Manual and Software (Programming)
Manual.
2.5 Uninstall software
There are two ways to uninstall the MPC2810 program:
1) Run UNWISE.exe in the MPC2810 folder.
2) Control Panel Run “Add/Remove Programs” to uninstall the
MPC2810 program.
2.6 Software Update
Please update the driver and/or the function library through our website,
http://www.leetro.com. The later version will be compatible with former ones.
The updating procedure is:
1. Close all program
2. Uninstall the former program
3. Run the later setup program
4. If it is developed by Visual Basic6.0, please update “MPC2810.dll”and
“MPC2810.bas”in the Microsoft Visual Basic Project.
5. If it is developed by Visual C++6.0, please update “MPC2810.dll”,
“MPC2810.lib”and “MPC2810.h”in the Microsoft Visual C++ Project in
the mode of implicit invocation.
In the mode of explicit invocation, please update “MPC2810.dll”,
“MPC2810.lib”, “LoadMPC2810.h” and “LoadMPC2810.cpp” in the
Microsoft Visual C++ Project.