Leetro MPC2810 User Manual

MPC2810 Motion Controller Hardware Manual
34
(2) Universal Output Loop
Open-collector output of MPC2810 can be connected to relay, and photo coupler.
The max output current is 200mA, voltage is 24V. It can be used as switch inputs
of servo system (Servo-ON, Error Counter Reset) or be used for driving
intermediate relay or photo coupler of 24DCV.
DC24/12
+
－
D3
D2
MPC2810
(a) Contact-Switch
Fig.3-13 GI Connection Diagram
(b) NPN Switch
Fig.3-14 Universal Input Connection
DC24/12
+
－
D3
D2
MPC2810
Signal Input
DC24
－
+
D36
D3
Output
R
(a) Drive Photo Coupler
Fig.3-15 General Output Connection
MPC2810
ULN2803
Photo Coupler
Input
输入口

Leetro MPC2810 Specifications

General

Brand	Leetro
Model	MPC2810
Category	Controller
Language	English