Page 12
301 Fulling Mill Road, Suite G ©Copyright 2015 by Legrand,
Middletown, PA 17057 Inc All Rights Reserved.
(800) 321-2343 www.legrand.us
2.6 IP Camera Subsystem
The Legrand Intuity System is designed to support either of the Legrand IP Cameras (CM7000/
CM7100) and the Legrand CM2001 IP Server. The installation sheets included with these
components are as follows: CM7000 – (P/N 1507215), CM7100 – (P/N 1507216) and CM2001 –
(P/N IS-0593).
Important Notes:
A. All of the IP Camera Subsystem components should be installed and configured
before installing the Intuity System.
B. Once the Intuity System is commissioned, Cameras should automatically appear
active on the user interface. There is NO need to use the Device Assistant for device
discovery. The Device Assistant can be used to configure the camera names, port
settings and assign the cameras to a room.
C. For external Camera viewing, cameras will need to be port forwarded through the
homes router. Refer to section 7.2 for more detail.
D. A CM2001 Video Door Enabling Kit, and a composite video cable, is for connection
to the video output on the IC5010 Intercom Module, in order for the Video Door
Camera to be displayed on the Intuity System.
To Next Page
Loading...
Need help?
General
