Page 25
301 Fulling Mill Road, Suite G ©Copyright 2015 by Legrand,
Middletown, PA 17057 Inc All Rights Reserved.
(800) 321-2343 www.legrand.us
NOTE: 3-Way Dimmer/Switch devices do not need to be added to the system - only
Master Dimmer/Switches. 3-Way Dimmer/Switch devices should be group bound to the
master switches prior to the addition of any RFLC lighting devices to the Intuity System.
If a Remote device is added by accident, simply go to the Device Assistant > Remove
Devices and remove that device.
NOTE: Standard On/Off Switches will appear under the “Outlets” page in the Intuity
System by default. The device type can be changed by selecting the switch under the list
of devices and changing its device type to “Light”. The switch will now appear properly
in the “Lights” page.
6.1.4 Scene Controllers
The Intuity Home Automation System is now compatible with the adorne Scene Controller (part
numbers ADTPRIWHCW1, ADTPRIWHCM1, ADTHRIWHCW1, ADTHRIWHCM1) and the
radiant Scene Controllers (part numbers LC2303-WH, LC2303-LA and LC2303-NI).
The new Scene Controllers can be added to the Intuity Home Automation System by using the
same steps provided in Section 6.1.3 Add RFLC Devices . The addition of a scene controller to
the Intuity Home System will allow for the buttons on the device to function as device triggers for
an activity. Please refer to Section 8.0 Creating Activities for more information. For further
instructions on how to create an activity using the Scene Controller, please refer to the Intuity
User Guide (P/N 1308241).
To Next Page
Loading...
Need help?
General
