Page 46
301 Fulling Mill Road, Suite G ©Copyright 2015 by Legrand,
Middletown, PA 17057 Inc All Rights Reserved.
(800) 321-2343 www.legrand.us
If using the TL280-RE Communicator Board – Enter [425] and hit 1 on the keypad
to enable Serial Communication.
Enter [#][#][#] to save all settings and exit programming mode
NOTE: If using an older version of the communicator prior to v5.0, the number selection for
accessing the Integration Account Code will be [651] and the selection for accessing the
Integration Access Code will be [652].
NOTE: Using an older revision of the communicator may also affect compatibility with certain
models of the DSC Power Series Neo Security Panels.
NOTE: After making the changes for the TL280RE Communicator board, it may be necessary to
reboot the security controller before adding the security panel to the Intuity System.
To Next Page
Loading...
Need help?
General
