Leica Digilux 3 User Manual

Advanced
71
2 Press

/

/

/

to finely adjust
the white balance and then press
[MENU/SET].
: A (AMBER: ORANGE TINT)
: B (BLUE: BLUISH)
: GA(GREEN: GREENISH)
: MB (MAGENTA: REDDISH)
• If you finely adjust the white balance to
A (amber), the white balance icon on
the LCD monitor will change to orange.
If you finely adjust the white balance to
B (blue), the white balance icon on the
LCD monitor will change to blue.
• If you finely adjust the white balance to
G
A (green) or M B (magenta), [ A ] (green)
or [
B ] (magenta) appears beside the
white balance icon on the LCD monitor.
• Select the center point if you are not
finely adjusting the white balance.
• You can finely adjust the white balance
independently for each white balance
item.
• The white balance fine adjustment setting
is displayed on the screen when using the
flash.
• The white balance fine adjustment setting
is memorized even if the camera is turned
off.
• The white balance fine adjustment level
returns to the standard setting (center
point) in the following cases.
– When you reset the white balance in
[WHITE SET] (P70) ([ ] or [ ])
– When you reset the color temperature
manually in [COLOR TEMPERATURE
SETTING] (P70) ([ ])
Setting the ISO
Sensitivity
ISO is a measure of sensitivity to light. The
higher the sensitivity is set, the less light is
needed to take a picture so the camera
becomes more suitable for recording in
dark places.
1 Press [ISO] .
: When taking pictures with Live View
2 Rotate the command dial to
select the ISO sensitivity.
• When setting to [AUTO], the ISO
sensitivity is automatically adjusted
from [ISO100] to [ISO400] according to
the brightness.
3 Press the shutter button halfway
to set the selected ISO sensitivity.
• You can also set the selected ISO
sensitivity by doing the following:
– Pressing [ISO]
– Not operating the camera for a few
seconds
MENU
A B
G
M
AUTO
AUTO
SET
MENU
ADJUST.
SET
WB ADJUST.
STANDARD
STANDARD
ISO
ISO
AUTO
AUTO
AUTO
AUTO
19
19
SINGLE
SINGLE
NORMAL
NORMAL
CUSTOM
CUSTOM
P
WB
WB
AUTO
AUTO
100
100
200
200
400
400
800
800
1600
1600
ISO
ISO
AUTO
AUTO
P
AUTO
AUTO
100
100
200
200
400
400
800
800
1600
1600
STD
STD
19
19
B
A
STANDARD
STANDARD
ISO
ISO
100
100
AUTO
AUTO
19
19
SINGLE
SINGLE
NORMAL
NORMAL
CUSTOM
CUSTOM
P
WB
WB
100
100
200
200
400
400
800
800
1600
1600
AUTO
AUTO
C

Leica Digilux 3 Specifications

General

Camera type	SLR Camera Body
Sensor type	Live MOS
Image stabilizer	No
Image sensor size	4/3 \
Supported aspect ratios	3:2, 4:3, 16:9
Maximum image resolution	3136 x 2352 pixels
Still image resolution(s)	- 3136 x 2352\\r - 2560 x 1020\\r - 2048 x 1536\\r - 3136 x 2080\\r - 2560 x 1712\\r - 2048 x 1360\\r - 3136 x 1760\\r - 1920 x 1080
Optical zoom	1.5 x
Focal length range	2.8 - 3.5 mm
Minimum aperture number	-
Maximum focal length (35mm film equiv)	50 mm
Minimum focal length (35mm film equiv)	14 mm
Focus	TTL
ISO sensitivity	100, 200, 400, 800, 1600, Auto
Light exposure modes	Auto, Manual
Light exposure correction	± 2EV (1/3EV step)
Fastest camera shutter speed	1/2000 s
Slowest camera shutter speed	60 s
Flash modes	Auto, Flash off, Red-eye reduction, Slow synchronization
External flash connector	Yes
Power source type	Battery
HD type	Not supported
Maximum video resolution	- pixels
Memory slots	1
Internal memory	- MB
Compatible memory cards	MMC, SD, SDHC
Display diagonal	2.5 \
USB version	2.0
White balance	Auto, Daylight, Flash, Halogen, Manual, Outdoor, Shade
Self-timer delay	2, 10 s
Languages support	CZE, DEU, ENG, ESP, FRE, HUN, ITA, JPN
Battery capacity	1500 mAh
Battery life (CIPA standard)	450 shots
Product color	Black, Silver
Storage temperature (T-T)	3136 x 2352 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 80 %

Weight and Dimensions

Depth	80 mm
Width	145.8 mm
Height	86.9 mm
Weight	530 g