EasyManuals Logo

Leica Digilux 3 User Manual

Leica Digilux 3
136 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #98 background imageLoading...
Page #98 background image
Connecting to other equipment
98
Connecting to other equipment
Connecting to a PC
You can acquire recorded pictures to a PC
by connecting the camera and the PC.
The software “Adobe Photoshop
®
Elements
®
“ 4.0 (win)/3.0 (Mac) on the
CD-ROM (supplied) allows you to easily
acquire pictures recorded with the camera
to a PC, print them and send them by
e-mail.
If you use “Windows
98/98SE”, install
the USB driver and then connect it to
the computer.
: USB connection cable (supplied)
: AC adaptor (supplied)
: This message appears during data
transfer.
Use a sufficiently charged battery (P19) or
the AC adaptor.
Turn the camera off and then insert or
remove the cable for the AC adaptor.
1 Turn on the camera and the PC.
2 Connect the camera to a PC via
the USB connection cable
(supplied).
Align the [] mark on the USB
connection cable and the [ ] mark
on the terminal of the adaptor when
connecting.
Hold the USB connection cable at
and insert straight in or take straight
out. (If you forcibly insert the USB
connection cable at a slant or upside
down you can deform the connection
terminals and damage the camera or
the connected equipment.)
3 Press
to select [PC] and then
press [MENU/SET].
If you set [USB MODE] in the [SETUP]
menu to [PC] in advance, it is not
necessary to set this every time you
connect to a PC. (P29)
If you set [USB MODE] to
[PictBridge (PTP)] and then connect the
camera to the PC, messages may
appear on the screen of the PC.
Select [CANCEL] to close the messages
and disconnect the camera from the PC.
Set [USB MODE] to [PC] again.
[Windows]
The drive appears in the [My Computer]
folder.
If you are connecting the camera to a PC
for the first time, the required driver is
installed automatically so that the camera
can be recognized by “Windows Plug and
Play”. The drive then appears on the
[My Computer] folder.
V OUT /
REMOTE
USB
ACCESS
D
C
A
B
USB MODE
PictBridge(PTP)
SELECT
SET
MENU
PC
SET
MENU
PLEASE SELECT
THE USB MODE

Table of Contents

Other manuals for Leica Digilux 3

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Leica Digilux 3 and is the answer not in the manual?

Leica Digilux 3 Specifications

General IconGeneral
Camera typeSLR Camera Body
Sensor typeLive MOS
Image stabilizerNo
Image sensor size4/3 \
Supported aspect ratios3:2, 4:3, 16:9
Maximum image resolution3136 x 2352 pixels
Still image resolution(s)- 3136 x 2352\\r - 2560 x 1020\\r - 2048 x 1536\\r - 3136 x 2080\\r - 2560 x 1712\\r - 2048 x 1360\\r - 3136 x 1760\\r - 1920 x 1080
Optical zoom1.5 x
Focal length range2.8 - 3.5 mm
Minimum aperture number-
Maximum focal length (35mm film equiv)50 mm
Minimum focal length (35mm film equiv)14 mm
FocusTTL
ISO sensitivity100, 200, 400, 800, 1600, Auto
Light exposure modesAuto, Manual
Light exposure correction± 2EV (1/3EV step)
Fastest camera shutter speed1/2000 s
Slowest camera shutter speed60 s
Flash modesAuto, Flash off, Red-eye reduction, Slow synchronization
External flash connectorYes
Power source typeBattery
HD typeNot supported
Maximum video resolution- pixels
Memory slots1
Internal memory- MB
Compatible memory cardsMMC, SD, SDHC
Display diagonal2.5 \
USB version2.0
White balanceAuto, Daylight, Flash, Halogen, Manual, Outdoor, Shade
Self-timer delay2, 10 s
Languages supportCZE, DEU, ENG, ESP, FRE, HUN, ITA, JPN
Battery capacity1500 mAh
Battery life (CIPA standard)450 shots
Product colorBlack, Silver
Storage temperature (T-T)3136 x 2352 °C
Operating temperature (T-T)0 - 40 °C
Operating relative humidity (H-H)10 - 80 %
Weight and Dimensions IconWeight and Dimensions
Depth80 mm
Width145.8 mm
Height86.9 mm
Weight530 g

Related product manuals