Menu Settings
97
3 Press
/
to determine the
horizontal position and then
press the shutter button to set.
•Use / to set the frame position for
pictures rotated vertically.
• The message [DELETE ORIGINAL
PICTURE?] appears.
4 Press
/
to select [YES] or
[NO] and then press [MENU/SET].
• The picture is overwritten when you
select [YES]. If you convert the aspect
ratio of a picture and then overwrite it,
you cannot restore it.
• A picture with the converted aspect ratio
is newly created when you select [NO].
• When the original picture is protected,
you cannot overwrite it. Select [NO] and
newly create a picture with the
converted aspect ratio.
5 Press [MENU/SET] twice to close
the menu.
• Files that do not conform to the DCF
standard cannot be converted. DCF is an
abbreviation of “Design rule for Camera
File system”.
• You may not be able to convert pictures
taken on other equipment.
Press [ ] to display the [PLAY] mode
menu and select the item to set. (P88)
It is not usually necessary to format a card.
Format it when the message [MEMORY
CARD ERROR] appears.
Press
to select [YES] and then
press [MENU/SET].
• Formatting irretrievably deletes all the
data including any protected pictures.
Check the data carefully before
formatting.
• If the card has been formatted on a PC or
other equipment, format it on the camera
again.
• Use a sufficiently charged battery (P19) or
the AC adaptor when formatting.
• Do not turn the camera off during
formatting.
• You cannot format an SD Memory Card or
an SDHC Memory Card when the card’s
Write-protect switch is set to [LOCK].
• If the card cannot be formatted, consult
your dealer.
SET : SHUTTER
ADJUST
EXIT
MENU
SET
MENU
NO
YES
DELETE ORIGINAL
PICTURE?
ASPECT CONV.
MENU
SETSELECTCANCEL
[FORMAT]
Initializing the card
SET
MENU
FORMAT
SELECT
SET
MENU
DELETE ALL DATA
ON THE MEMORY CARD?
SET
MENU
NO
YES
To Next Page
Loading...
Need help?
General
Weight and Dimensions
