Step 2. Align the front I/O bezel with its slot on the front of the node; then, insert the front I/O bezel into
place.
Figure 115. Installation of the front I/O bezel
Step 3. Tighten the five screws that secure the front I/O bezel.
Figure 116. Installation of the front I/O bezel screws
After this task is completed
• Proceed to complete the parts replacement (see
“Complete the parts replacement” on page 161).
Demo video
https://www.youtube.com/watch?v=uC3SFsq4HiM
Update the Vital Product Data (VPD)
Use this topic to update the Vital Product Data (VPD).
• (Required) Machine type
• (Required) Serial number
Chapter 5. Hardware replacement procedures 153
To Next Page
Loading...
