• “7mm SATA drives” on page 167
• “7mm NVMe drives” on page 168
15mm NVMe drives
Figure 123. Backplane power cable and Gen 4 high-speed cable for the 15mm drives; Drive backplane 1 (lower)
Cable
From To
1
Drive-backplane 1 power connector
Power connector for drive backplane on the I/O
module board
2
Drive-backplane 1 MCIO connector for NVMe MCIO connector 1 on the system board
Attention:
• Make sure that all cables between the drive backplane(s) and the system-board connectors go through
the cable wall on the power module board.
166
ThinkEdge SE350 V2 User Guide
To Next Page
Loading...
