Note: The transmission speed of SFP28 connectors could be 10 Gbps or 25 Gbps, depending on the
processor selected. Processors with at least 16 cores support transmission speed of 25 Gbps.
Install I/O fillers
Install the I/O fillers when the connectors are not in use. The connectors could be damaged without proper
protection of the fillers.
Figure 6. Front I/O fillers
1 SFP+ filler (x4, if applicable for the server configuration) 3 USB Type-A filler (x2)
2 RJ-45 filler (x7 or x3, depending on the server
configuration)
4 USB Type-C filler (x2)
20 ThinkEdge SE350 V2 User Guide
To Next Page
Loading...
